Benjamin Moore Ultra Spec HP D.T.M. Acrylic, Gloss
This product is designed to perform a dual purpose as a direct to metal primer and finish. Both coats of the product provide rust inhibition for superior corrosion control. The acrylic formula provides excellent gloss and color retention. The film is fast drying permitting fast recoat. This product is also an excellent finish for masonry, plaster, wallboard and interior wood surfaces.
Ferrous or non-ferrous metal, Bilco® doors, railings, structural or
support steel, wood, masonry surfaces, bar joists, equipment, roof
vents, fencing, metal storage shed and general maintenance
painting interior or exterior surfaces.
- Direct to metal application
- Self-priming
- Excellent adhesion
- Improved gloss & color retention
- Fast dry and recoat times
- Corrosion resistant
- Easy application
- Gloss finish
- Not for floor applications
- Not for exposure to strong chemicals
| Series/Sub-Brand | Ultra Spec® HP D.T.M. Acrylic |
|---|---|
| Type | Interior/Exterior |
| Color | Tintable |
| Brand | Benjamin Moore |
| Color Family | Tintable |
| Finish | Gloss |
| Material | Water-Based |
| Manufacturer Code | HP28 |
Application: Stir thoroughly before and occasionally during use. For best application results, apply generously going from unpainted into painted areas. A one-coat application protects and preserves; two coats provides greater durability. Apply with an all-purpose synthetic brush, short nap roller, or spray.
Surface Prep: Surfaces to be coated must be clean, dry, and free of oil, grease, dust, flaky rust, mill scale, loose paint, chalk, and other foreign matter than could interfere with adhesion. Glossy surfaces should be dulled by abrading the surface.
Clean up: Soap and Water
Coverage: 300 – 400 Sq. Ft.
Dry Time: To Touch 1 Hour – To Recoat 4 Hours
Do not apply when air and surface temperatures are
below 50 °F (10 °C).
