Benjamin Moore Super Spec HP D.T.M. Alkyd, Low Lustre
A highly versatile alkyd-based coating, Super Spec HP® D.T.M. Alkyd Low Lustre seals and protects both exterior and interior metal surfaces from rusting and moisture. Super Spec HP® D.T.M. Alkyd Low Lustre offers superior rust inhibition and protection along with the convenience of a primer and topcoat system in a single package.
For exterior or interior surfaces such as steel, aluminum, wrought iron railings, and metal roof decks.
*FOR USE ON METAL SUBSTRATES ONLY*
- Tough, durable film with outstanding adhesion
- Attractive low lustre finish
- For exterior or interior use
- Self priming with easy application
- Extremely durable with rust-inhibitive ingredients
- Do not apply when air and surface temperatures are below 50 °F (10 °C)
- Not for application directly on galvanized metal.
| Series/Sub-Brand | Super Spec® |
|---|---|
| Type | Interior/Exterior |
| Color | Tintable |
| Brand | Benjamin Moore |
| Color Family | Tintable |
| Finish | Low Lustre |
| Material | Oil-Based |
| Manufacturer Code | P23 |
Application:
Surfaces to be coated must be clean, dry, and free of oil, grease,
dust, flaky rust, mill scale, loose paint, chalk, and other foreign
matter than could interfere with adhesion. Glossy surfaces should be
dulled by abrading the surface.
Mixing of Paint: Stir thoroughly before and occasionally during use. Do not thin. For best application results, apply generously going from unpainted to painted areas. A one-coat application protects and a preserve, two coats provide greater durability. Apply with a china bristle or all-purpose synthetic brush, short nap roller, or spray.
Super Spec HP® D.T.M. Alkyd Low Lustre is self-priming. No other primer product is usually necessary. All alkyd-based enamels experience a certain amount of yellowing. This effect is accelerated in dark or poorly ventilated areas. In these problem areas, the use of an acrylic finish such as Ultra Spec® HP D.T.M. Acrylic Low Lustre (HP25) is recommended.
Coverage: 350 - 450 sqft
Clean up: Paint thinner/Mineral Spirits
Dry Time: – To Touch 2 Hours – To Recoat 16 Hours
