Chat with us, powered by LiveChat

Firenzecolor® Cera Plus Clear Interior Wax

In stock
Only %1 left
SKU
FCCERACLEARWAX
 
 

Cera Wax is a decorative finish formulated with polyethylene waxes, with special metallic pigments, and rheological modifiers, that permit to achieve an easy-to-apply material. Its special formulation guarantees high level of brightnesss, several pearly shades and a soft water protection. Cera Wax is a decorative treatment for interiors to be used on top of mineral and synthetic surfaces. This is a water based acrylic clear wax top coat.

NOTE: On-screen and printed color representations may vary from actual tinted paint colors. 

As low as $17.00
each

Choose an option to check availability and buy.

  • Color: Clear
  • Interior Only
  • Protective Finish
  • easy to apply
  • Approx. 24 hour dry time
  • High water-repellency
  • Can Apply Two Coats for more effect
  • Water-based polyethylene wax
  • Remove excess as needed
More Information
Series/Sub-BrandNovacolor™
TypeInterior
Size1 Liter
ColorClear
Brandfirenzecolor
FinishGloss
MaterialWax
Manufacturer Code19CP1

Surface Preparation & Application: At leasy 48 hours after the application of the last coat of the mineral finish, apply on top of a coat of Cera-Wax, using different application procedures according to the kind of substrate to be treated. On smooth surfaces apply one coat of Cera-Wax using a stainless steel trowel with regular movements. On rough surfaces, the application of Cera-Wax may be different depending on the decorative effect created with the products before. After application, wait a few minutes and work the surface by removing excess wax left on the surface. Recommended using a rag to absorb the excess. On rougher surfaces, apply with a sponge trowel removing the excess amount of product applied.
Preparation: Base coat must be completely dry, allow 48 hours for the substrate to dry.
Clean Up: Immediately, with water
Dilution:Recommended 1:1 with water, or as needed for effect.
Coverage: 7-20 m2/l, depending on the kind of substrate and its absorption rate
Dry Time: approximately 24 hours depending on the kind of substrate and absorption rate.

Write Your Own Review
You're reviewing:Firenzecolor® Cera Plus Clear Interior Wax
Your Rating