Veto Pro Pac Tech-LC Large Tech Tool Bag
Free Gift w/Purchase (email will be sent after purchase with instructions)
The TECH-LC tool bag is a service technician bag designed to accommodate technicians tools and work routines. A number of changes have been made to tailor the tool bag to accommodate HVAC service technicians’ tools and work routines to optimize their tool storage solution. The TECH-LC tool bag sports 53 pockets with ample pocket room for hand tools, a parts box(es), meter(s), a cordless impact drill and other bulkier items. 8 new small neoprene pockets have been added for drill bits and bit extensions.
PRODUCT SPECIFICATIONS:
- Height: 13.5 in. (34cm)
- Width: 15 in. (38cm)
- Depth: 9.5 in. (24cm)
- Weight (empty): 6 lbs. (3kg)
- Max Payload: 35 lbs. (16kg)
- Internal Volume: 1080 cu.in, (18L)
- Vertical Tool Pockets: 50 inside and 3 outside
- Flat Zippered Pockets: 4 inside ande 2 outside
- Neoprene Pockets: 2
- D-Rings: 4 Large and 5 samll
- Exterior Electrical tape Loop: 8 in. Fabric with Clip closure
- Stainless Steel Tape Clip
- Shoulder Strap: Heavy Duty, Non-Slip Padded Shoulder Strap with Clip-On connection
| Type | Storage Bag |
|---|---|
| Manufacturer Code | VPP10068 |
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!