Benjamin Moore Ultra Spec Exterior, Gloss
A professional quality 100% acrylic exterior gloss finish which features excellent hiding, film durability and color retention. Fast-dry formula allows for quick re-coating as well as low temperature application.
Recommended for wood, hardboard, vinyl, aluminum and fiber cement sidings; unglazed brick, concrete, stucco, cinder block, and primed metal.
Not for interior use
- Exceptional film durability
- Exceptional hiding power
- Resistant to color fading, blistering, and alkali
- May be applied at temperatures down to 40 °F (4.4 °C)
- Long lasting gloss
- Easy to apply
- Rapid dry for quick recoating
- Provides mildew resistant coating
- Do not apply when air and surface temperatures are below 40 °F (4.4 °C)
- Do not paint vinyl siding or trim darker than the original
color
| Series/Sub-Brand | Ultra Spec® |
|---|---|
| Type | Exterior |
| Color | Tintable |
| Brand | Benjamin Moore |
| Color Family | Tintable |
| Finish | Gloss |
| Material | Water-Based |
| Manufacturer Code | N449 |
Surface Prep: Surfaces must be clean, dry and free of oil, grease, wax, rust, mildew, chalk and loose or scaling paint. Cement based water proofing paints should be removed. Glossy surfaces must be dulled.
Application: Stir thoroughly before and during use. Apply one or two coats. Paint Application: For best results, use a custom-blended nylon/poly brush, roller or similar product. Apply paint generously from unpainted area into wet area. This product can also be sprayed.
Clean up: Soap and Water
Coverage: 350 – 450 Sq. Ft
Dry Time: To Touch 1 Hour – To Recoat 4 Hours
