Chat with us, powered by LiveChat

SEAL-KRETE® High Performance Floor Coatings, Vapor Shell Moisture Vapor Barrier, 1 Gallon Kit

In stock
SKU
SK245002
 
 

Seal-Krete® Vapor-Shell is a low viscosity, clear, one-coat, 100% Solids Epoxy, membrane-forming, moisture vapor control system formulated to bond to concrete with high (or excessive) relative humidity (RH). Seal-Krete Vapor-Shell is designed to reduce moisture vapor emission levels from 25 lbs./1000 sq. ft./24 hours to 3lbs./1000 sq. ft./24 hours or less. With a low permeance of 0.09 perms, Seal-Krete® Vapor-Shell is an excellent moisture blocker for virtually all types of flooring, including low permeance flooring. Ideally suited for priming in commercial, industrial and institutional applications were moisture vapor control may be an issue.

NOTE:  Product picture does not depict size, check stated sizing for correct quantity.

$133.00
each
Select a store
47 Available in stock
Delivery
Available
  • Moisture Vapor Barrier
  • Low Viscosity clear
  • Moisture vapor control system
  • Reduce moisture vapor emissions
  • Moisture blocker
  • Excellent adhesion
  • Resistant to high pH levels
More Information
Series/Sub-BrandHigh Performance
TypeInterior
SizeGallon Kit
ColorClear
BrandSeal Krete
MaterialAmidoamine Converted Epoxy
Manufacturer Code245002

Resin Type: Amidoamine Converted Epoxy

Coverage: 80-100 sq. ft. per gallon, Coverage rate can vary depending on the texture and porosity of the concrete

Dry Times: Recoat in 12-14 hours. Scuff sanding is required if greater than 24 hours.

Pot Life: 25 minutes @ 77°F (25°C)

Mixing Ratio: 3:2 (Base to activator by volume), Must mix Part A & Part B together for 1-3 minutes with a low speed drill and spiral mixing wand. DO NOT hand mix.

Clean Up: Clean tools and application equipment immediately after use with an active solvent like acetone.

Write Your Own Review
You're reviewing:SEAL-KRETE® High Performance Floor Coatings, Vapor Shell Moisture Vapor Barrier, 1 Gallon Kit
Your Rating