SEAL-KRETE® High Performance Floor Coatings, Performance Epoxy, 3 Gallon Kit
Seal-Krete® Performance Epoxy is an epoxy-based coating system that provides outstanding customer value. Blending durability with outstanding adhesion properties, this coating can be used on a variety of substrates including tile, laminates, and direct to concrete. Its great value, slower dry time, and low odor formulation makes Performance Epoxy ideal for larger indoor application areas.
- Versatile–coatings, broadcast floors, chip floors & slurry/broadcast
- Direct to Concrete
- Easy 2:1 mix ratio
- User friendly, slower dry time
- Low odor – 100% solids
- Tenacious adhesion
- Chemical resistant
- Compliant nationwide with near zero VOC
- Laboratories
- Manufacturing plants
- Research facilities
- Shower and locker rooms
- Retail stores
| Series/Sub-Brand | High Performance |
|---|---|
| Type | Interior |
| Size | 3 Gallon Kit |
| Color | Clear |
| Brand | Seal Krete |
| Color Family | Clear |
| Finish | Gloss |
| Material | 100% Solids Epoxy |
| Manufacturer Code | 322767 |
Resin Type: Amidoamine Converted Epoxy
Coverage: 100-150 sq. ft. per gallon, Coverage rate can vary depending on the texture and porosity of the concrete
Dry Times: Recoat in 12 hours. Light foot traffic 12 hours. Vehicular traffic 72 hours.
Pot Life: 30-45 minutes depending on air/surface temperatures
Mixing Ratio: 2:1 (Base to activator by volume), Must mix Part A & Part B together for 3 minutes with a low speed drill and spiral mixing wand. Do not aerate the mix.DO NOT hand mix.
Clean Up: Clean tools and application equipment immediately after use with an active solvent like xylene.