Schlage Flair F51A V FLA 505 Entry Lever Lockset, Keyed Different Key, 2 Grade, Brass
For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turn button lever inside, inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3-Piece assembly. All locksets have the same finish for both interior and exterior parts except the Bright Brass finish which has bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. Door Prep 2-1/8 in crossbore; 7/8 in or 1 in edge bore; 1 in x 2-1/4 in latch face. Door Thickness 1-3/8 to 1-3/4 in. Cylinder 5-pin tumbler C keyway with nickel silver pins and keys (2). Faceplate 1 in x 2-1/4 in. 2-1/4 in full lip. Bolt 1/2 in throw. ANSI/BHMA meets 400, 000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. Fits all doors; 2-3/4 in or 2-3/8 in backset; square corner, round corner or drive in preps.
$53.39
each
- Keyed entry function unlocks when door is opened from the inside, allowing you to leave quickly, conveniently and re-enter easily
- Works with right and left swing doors
- Fit standard pre-drilled doors
- Finishes coordinate easily with plumbing and lighting fixtures
- Use a key from the outside or manually rotate the interior turn button to lock and unlock
- Lock and finish backed by limited lifetime warranty
- Easy installation with Phillips screwdriver
- Self-aligning screw holes make installation easy and hassle-free
- Universal latches slide easily into place and require no tools or manual adjustments
| Type | Entry Set |
|---|---|
| Brand | Schlage |
| Manufacturer Code | F51A V FLA 505 |
Write Your Own Review