Rust-Oleum® Appliance Epoxy, White, Gloss, Oil-Based, Spray Paint, 12 oz.

Surface preparation: Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces. Clean with soap and water, rinse and let dry.
Application: Apply when temperature is between 50-90ºF (10-32ºC) and humidity is below 85% to ensure proper drying. Before using, mix thoroughly to ensure any settled pigment is re-dispersed. If thinning is necessary, thin the material with mineral spirits or acetone only. For small areas, use a good quality brush and apply light, even coats to ensure an even flow and finish. For large surfaces, use a good quality foam roller that is designed to give a smooth finish. Do not use near open flame.
Coverage: One quart of Appliance Epoxy will cover 120 square feet with 2 coats if applying on an average refrigerator.
Recoat: Based on 70ºF (21ºC) and 50% relative humidity. Allow more time at cooler temperatures. Dries to the touch in 2-4 hours, to handle in 5-9 hours and is fully dry in 24 hours. Appliance Epoxy may be recoated within 1 hour or after 24 hours.
Clean-Up: Clean roller and other application tools immediately with mineral spirits. Properly discard empty containers.