Romabio Unico Plaster System Primer, 2.5-liter
UNICO PRIMER: is an adhesion promoter and consolidator for all difficult substrates. It is a single-component primer based on special resins which it combines with special additives, providing the product with high adhesion capacity on all surfaces.
ROMABIO UNICO PLASTER SYSTEM consists of different categories of products, each one formulated according to the different application needs and the type of surface where the system is to be applied. The products that make up the cycle are essential to obtain the best results both in terms of aesthetics and performance. All these materials are formulated to work in close synergy with each other, but each product is created to meet different needs. It is essential that they are used correctly according to the methods described in the following sections dedicated to the type of surface.
- Tough and very durable perfect for floors, high traffic hallways and walkways, and other Interior and Exterior walls
- Unique formulation based on precious resins and high-strength precious aggregates
- Excellent flexibility, resisting the micro-movements of the substrate
- Excellent waterproofing while also offering high mechanical characteristics throughout the cycle
| Series/Sub-Brand | Unico |
|---|---|
| Size | 2.5 Liter |
| Brand | ROMABIO |
| Material | Water-Based |
| Manufacturer Code | UPR25L |
All Surfaces must be clean, dry and compact and free from flaking, salt bloom or damp, wax, oil and dust. Preparation of the substrate is a mandatory step for successful results. Before application, thoroughly wash the surface with a soda-based (alkaline) cleaner. All oily substances form a film that can prevent the coating from adhering.
Apply a coat of UNICO PRIMER with a roller diluted 30% and, while the product is still wet, apply the fiber glass net gr 70 (not to surmount but only to pull over). Apply again a coat of UNICO PRIMER fully covering the net. Wait about 4 hours for drying.
UNICO PRIMER can be applied on all surfaces such as: tiles, concrete, plaster, plasterboard, paints, resins, marble, wood, formica, melamine, etc. It can be applied to horizontal or vertical surfaces by diluting the product according to the absorption of the substrate. The dilution can vary from 10 to 30%. Application Tools: Short-haired roller /brush; Number of Coats: 1 + 1 (Fiberglass mesh gluing + fixing)
FIBERGLASS MESH: Fiberglass mesh with high resistance and low weight with a density of 70 g/m2. Resistant to alkalis, it does not decompose or rust over time, does not emit toxic and harmful substances, has high resistance to tearing and stretching, improves mechanical resistance and facilitates the application of the products.
Clean Up: Soap & Water
Coverage: 200-230 sq ft per coat
Dry Time: 1-4 hours