Address: 181 West Ave, Darien, CT 06820
Address: 9 Taylor Ave, Bethel, CT 06801
Address: 355 Newbury St, Boston, MA 02115
Address: 25 E Industrial Rd, Branford, CT 06405
Address: 59-67 Federal Rd, Danbury, CT 06810
Address: 1139 Post Rd, Fairfield, CT 06824
Address: 848 Lafayette Rd, Hampton, NH 03842
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Address: 85 Bradley Rd, Madison, CT 06443
Address: 149 Everett St, Middleboro, MA 02346
Address: 1193 Ashley Blvd, New Bedford, MA 02745
Address: 308 S Frontage Rd, New London, CT 06320
Address: 140 Danbury Rd, New Milford, CT 06776
Address: 201 Merrimac St, Newburyport, MA 01950
Address: 50 Needham St, Newton Highlands, MA 02461
Address: 14 Church Hill Rd, Newtown, CT 06470
Address: 28 Hope St, Niantic, CT 06357
Address: 149 Westport Ave, Norwalk, CT 06851
Address: 131 Boston Post Rd, Orange, CT 06477
Address: 58 Shops at Five Way, Plymouth, MA 02360
Address: 1037 Forest Ave, Portland, ME 04103
Address: 1976 Woodbury Ave Ste 2, Portsmouth, NH 03801
Address: 35 Scamman St, Saco, ME 04072
Address: 153 Ocean St, South Portland, ME 04106
Address: 87 Harvard Ave, Stamford, CT 06902
Address: 921 High Ridge Rd, Stamford, CT 06905
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeAddress: 921 White Plains Rd, Trumbull, CT 06611
Address: 14 Warren St, Waltham, MA 02453
Address: 877 Post Rd E, Westport, CT 06880
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Address: 129 Danbury Rd, Wilton, CT 06897
Address: 116 Cummings Park, Woburn, MA 01801
Address: 412 Route 1, Yarmouth, ME 04096
UNICO PRIMER: is an adhesion promoter and consolidator for all difficult substrates. It is a single-component primer based on special resins which it combines with special additives, providing the… Show more
UNICO PRIMER: is an adhesion promoter and consolidator for all difficult substrates. It is a single-component primer based on special resins which it combines with special additives, providing the product with high adhesion capacity on all surfaces.
ROMABIO UNICO PLASTER SYSTEM consists of different categories of products, each one formulated according to the different application needs and the type of surface where the system is to be applied. The products that make up the cycle are essential to obtain the best results both in terms of aesthetics and performance. All these materials are formulated to work in close synergy with each other, but each product is created to meet different needs. It is essential that they are used correctly according to the methods described in the following sections dedicated to the type of surface.
Show lessSeries/Sub-Brand | Unico |
---|---|
Size | 1 Liter |
Brand | ROMABIO |
Material | Water-Based |
Manufacturer Code | UPR1L |
All Surfaces must be clean, dry and compact and free from flaking, salt bloom or damp, wax, oil and dust. Preparation of the substrate is a mandatory step for successful results. Before application, thoroughly wash the surface with a soda-based (alkaline) cleaner. All oily substances form a film that can prevent the coating from adhering.
Apply a coat of UNICO PRIMER with a roller diluted 30% and, while the product is still wet, apply the fiber glass net gr 70 (not to surmount but only to pull over). Apply again a coat of UNICO PRIMER fully covering the net. Wait about 4 hours for drying.
UNICO PRIMER can be applied on all surfaces such as: tiles, concrete, plaster, plasterboard, paints, resins, marble, wood, formica, melamine, etc. It can be applied to horizontal or vertical surfaces by diluting the product according to the absorption of the substrate. The dilution can vary from 10 to 30%. Application Tools: Short-haired roller /brush; Number of Coats: 1 + 1 (Fiberglass mesh gluing + fixing)
FIBERGLASS MESH: Fiberglass mesh with high resistance and low weight with a density of 70 g/m2. Resistant to alkalis, it does not decompose or rust over time, does not emit toxic and harmful substances, has high resistance to tearing and stretching, improves mechanical resistance and facilitates the application of the products.
Clean Up: Soap & Water
Coverage: 80-90 sq ft per coat
Dry Time: 1-4 hours