Benjamin Moore Regal Select Exterior High Build, Flat
A premium quality, high build, self priming, 100% acrylic latex formula engineered for optimum hide. It adheres powerfully to exterior substrates and provides advanced mildew and stain resistance. With easy application by brush, roller or spray, this coating offers excellent flow and leveling and delivers an extremely durable, protective finish.
Recommended for wood, hardboard, fiber cement, cedar shake, vinyl and aluminum siding; unglazed brick, concrete, stucco, cinder block, and primed metal.
- Excellent hiding
- Dries quickly
- Low temperature application down to 35 °F
- Excellent color retention
- Self priming
- Durable finish resists fading, cracking, peeling and the formation of mildew on the surface of the film
- Do not paint vinyl siding or trim darker than the original color
- Not for interior use
| Series/Sub-Brand | Regal® Select |
|---|---|
| Type | Exterior |
| Color | Tintable |
| Brand | Benjamin Moore |
| Color Family | Tintable |
| Finish | Flat |
| Material | Water-Based |
| Manufacturer Code | N400 |
Application: Stir thoroughly before and during use. Apply one or two coats. For best results, use a custom-blended nylon/poly brush, roller or similar product. Apply paint generously from unpainted area into wet area.
Surface Prep: Surfaces must be clean, dry and free of oil, grease, wax, rust, mildew, chalk and loose or scaling paint. Cement based water proofing paints should be removed. Glossy surfaces must be dulled.
Coverage: 250 – 350 sq. ft.
Clean Up: Soap and Water
Dry Time: To Touch 1 Hour – To Recoat 4 Hours
