Chat with us, powered by LiveChat

Old Masters, Interior Oil-Based Polyurethane, Satin, Quart

In stock
SKU
OM49604
 
 
This is a self-leveling, clear finish designed to protect the beauty of interior surfaces. Easy to apply and quick drying, this polyurethane will provide lasting, durable protection from abrasion, marring, chipping, alcohol, and water. Available in satin, semi-gloss, and gloss sheens. Clear finishes are used to seal and protect surfaces. In many cases, clear finishes offer lasting, durable protection from abrasion, marring, and chipping. Most clear finishes also protect the surfaces from damage caused by water and alcohol. Exterior clear finishes provide protection to withstand water, weather, and sunlight.
$27.99
each
Select a store
288 Available in stock
Delivery
Available
    More Information
    TypePolyurethane
    SizeQuart
    BrandOld Masters
    Color FamilyClear
    FinishSatin
    MaterialOil-Based
    Manufacturer Code49604
    Application: Stir thoroughly before and during application. DO NOT SHAKE. For larger projects requiring more than one container, combine containers and mix to ensure gloss uniformity. Test the finish on an inconspicuous part of the surface prior to finishing to ensure adequate adhesion. Do not apply in direct sunlight or areas of extreme air movement. Apply with pure bristle or polyester brush, flat pad, or spray. A lambswool applicator may be used for large flat areas. Apply in full, even coats in the direction of the grain. Flow on with minimum brushing to achieve a glass-like finish. For wood floors, use a lambswool or synthetic pad applicator or a natural bristle brush and maintain a wet edge to avoid lap marks. Keep area dust free. Polyurethane will dry to touch in 3 hours. Under ideal drying conditions, allow 6 hours before recoating. Overnight drying is recommended. Sand lightly between coats with fine sandpaper (220 grit) to produce a finer finish and promote adhesion. If sandpaper gums up, allow more drying time. Remove sanding dust. Reapply. Two coats are recommended; however, for high traffic areas or abrasive conditions, more coats should be applied.
    Write Your Own Review
    You're reviewing:Old Masters, Interior Oil-Based Polyurethane, Satin, Quart
    Your Rating

    How to Pick The Proper Brush

    Interior Staining Project Guide

    How to Select Sandpaper Guide