Howard Restor-A-Finish® Wood Restorer, 16 oz., Mahogany
Restores original color and luster in one step, without removing any existing finish. With simple wipe-on, wipe-off process, most finished wood surfaces that seem to need complete refinishing job can be restored in minutes. White heat rings and water marks, scratches, color fade, oxidation, smoke damage and most other blemishes can be quickly eliminated.
- Restor-A-Finish® is a unique finish-penetrating formula that restores wood finishes while blending out minor scratches, blemishes and abrasions with a simple wipe-on, wipe-off process, most finished wood surfaces that seem to need a complete refinishing job can be restored in a few minutes
- Removes white heat rings and water marks, sun fade, oxidation, smoke damage and most other blemishes Restor-A-Finish restores the finish without removing any of the existing finish
| Type | Oil-Based |
|---|---|
| Size | 16 oz. |
| Color | Mahogany |
| Brand | Howard |
| Color Family | Brown |
| Material | Oil-Based |
| Manufacturer Code | RF5016 |
Choose the color of Restor-A-Finish that best matches the finish of your wood. Test on an inconspicuous area. Apply with a small pad of cloth, cover a small area at a time and immediately wipe dry. Do not pour directly on finish. To remove stubborn white rings, oxidation, or light scratches, apply Restor-A-Finish with a pad of super fine (0000) steel wool. Finishes vary in hardness, so test pressure to be used with (0000) steel wool on an inconspicuous spot. Rub lightly in the direction of the wood grain until blemish is blended away. Cover a small area at a time and wipe dry. To protect and maintain the newly restored finish, follow up with Howard Feed-N-Wax.
When using a soft cloth or steel wool, rub with light pressure but hard enough to blend away the damage. As you restore the finish be sure to periodically check your progress. Always rub with the grain of the wood. Some dry faded finishes will only require a quick wipe-on, wipe-off application and will quickly absorb Restor-A-Finish. Other finishes will require a little more work. Still other finishes may require leaving the Restor-A-Finish on longer so it can penetrate into the finish and restore color and depth of grain deep into the wood. All finishes are different, so testing first may be required. Always wipe off excess Restor-A-Finish.
Drying Time:
After wiping Restor-A-Finish dry, wait at least 30 minutes and then apply a coat of Howard Feed-N-Wax to protect and maintain the newly restored finish. Then re-apply Feed-N-Wax as needed, or when the finish starts to look dry.
Treating carved woods: Restor-A-Finish has saved many hours of labor by quickly restoring color and depth of grain on carved wooden furniture, clocks and picture frames. Simply apply Restor-A-Finish with a small paintbrush or soft toothbrush and wipe dry.