Graco Fine Finish Low Pressure, RAC X FF LP Reversible SwitchTips
Graco Airless Spray Fine Finish Low Pressure tips feature SmartTip Technology, Graco's exclusive internal tip geometry reduces the energy required to atomize your favorite paints, stains, and other materials – delivering a superior finish with less pressure.
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 108 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 2 to 4 inch fan pattern and a 0.008 inch orifice, ideal for thinner materials. Reverse the SwitchTip to easily clear clogs.
- Soft spray fan pattern makes it easy to apply any material to any surface
- Sprays at up to 50% lower pressure with less overspray to provide consistent blended finish quality with complete atomization
- Spraying at half pressure doubles tip life
- Reduces prep and cleanup – you put the paint where you want it
- Wors with GRACO RAC X HandTite Tip Guard only, G246215,
| Type | Spray Tip |
|---|---|
| Size | 108 |
| Style | Reversible |
| Brand | Graco |
| Material | Tungsten Carbide |
| Manufacturer Code | FFLP108 |
Must be used with GRACO RAC X HandTite Tip Guard, G246215, Does not work with orange GRACO RAC IV HandTite Tip Guard. Works with any Graco airless sprayer. Residential, Commercial or Industrial, Cabinetry, Woodworking, Metal and Fine Finish Surfaces.
To Install:
- Make sure spray equipment is turned off
- Remove the old worn tip. Typically turning counter clockwise to release.
- Install new seal into spray tip guard
- Install new tip by aligning it with the opening of the tip guard.
- Check for proper fit
- Test the setup
- Adjust as needed
