Type | Urethane |
---|---|
Size | Quart |
Color | Clear |
Brand | General Finishes |
Color Family | Clear |
Finish | Semi-Gloss |
Material | Oil-Based |
Manufacturer Code | SGQT |
Application Conditions: Recommended 70°F and 50% humidity, out of direct sunlight. Variations in conditions and application technique can significantly affect dry times and coverage.
Surface Prep: Always ensure the surface is clean of contaminants and dust. Sanding any surface too smoothly can reduce adhesion and create application issues like orange peel.
Raw Wood: Sand with no finer than 220 grit sandpaper. Sanding finer than 220 grit is not recommended.
Pre‐finished Wood: Clean using 50/50 mix of denatured alcohol and water with maroon non‐woven pad. Sand with fine (220‐320) foam sanding pad or maroon non‐woven pad.
Other Substrates: Not recommended
Application Tips: For best results, apply thin coats with a rag or cloth. A foam brush may be used on flat surfaces. While Arm-R-Seal can be sprayed, it is not the recommended application method. Its thin viscosity makes it easy to apply too much product when spraying, resulting in drips and runs.