General Finishes®, ENDURO® Water-Based Latex Extender, Pint
General Finishes®
Extender is a slow‐drying solvent that can be added to any of General
Finishes water‐based products to lengthen dry time and create a thinner
viscosity. It is ideal for finishing large areas and working in warm or dry
environments. It is highly recommended for use when using GF Glaze Effects.
As low as $18.49
each
- Lengthens the dry time
- Slow-drying solvent
- Added to any Water-based GF product
- Creates thinner viscosity
- Ideal for finishing large areas
- Recommended for GF Glaze Effects
| Series/Sub-Brand | ENDURO® |
|---|---|
| Type | Stain Extender |
| Size | Pint |
| Color | Clear |
| Brand | General Finishes |
| Material | Water-Based |
| Manufacturer Code | EXPT |
Mixing Instructions: Except in VOC regulated areas, thin General Finishes products with 5% Extender by volume (about 1.5 ounces per quart). Stir thoroughly after mixing. If desired, more Extender can be added. It is not recommended to exceed 15% Extender by volume (about 5 ounces per quart).
Use with Glaze Effects: Dampen a cloth or paper towel with Extender to remove freshly applied, dry Glaze Effects.
Write Your Own Review