Festool 576118 Plunge Cut Track Saw TS 75 EQ-F-Plus
Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.
Includes:
- TS 75 EQ-F-Plus Saw
- hex key 5 mm
- HW standard saw blade W36
- Plug It-Power cable (4m)
- sight window
- Splinterguard
- Systainer SYS3 M 437
$799.00
each
- When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
- Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance kickback
- The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
- Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
| Type | Track Saw |
|---|---|
| Diameter | 8-1/4 in. |
| Style | Corded |
| Brand | Festool |
| Manufacturer Code | 576118 |
Specifications:
| Idle engine speed | 1350 - 4400 RPM |
| Cable length | 4.00 m |
| Saw blade diameter | 8-1/4 in. (210 mm) |
| Drive Type | Mains |
| Cutting depth at 45 deg | 2-1/8 in. (55 mm) |
| Dust extraction connetion dia. | 1-1/16 in./1-7/16 in. (27/36 mm) |
| Power consumption | 1600 watt |
| Cutting depth | 0 in. - 3 in. (0 - 75 mm) |
| Angluar range | 0 -47° |
Write Your Own Review
