DAP® ALEX FAST DRY® Acrylic Latex Caulk Plus, 10.1 fl. oz.
- Strong multi-surface adhesion
- Paintable in 20 minutes
- Resists cracking and chalking
- Reduced dirt pick-up
- 100% waterproof seal
- Cured caulk is mold & mildew resistant
- Easy water clean-up
- Low odor
- VOC compliant
- Interior/exterior use
| Type | Sealant |
|---|---|
| Size | 10.1 fl. oz. |
| Color | Black |
| Brand | DAP |
| Material | Silicone |
| Manufacturer Code | 18126 |
1. Apply in temperatures above 40ºF. Do not apply when rain or freezing temperatures are forecasted within 24 hours. Cooler temperatures and higher humidity will slow down dry time.
2. If using the squeeze tube, remove cap.
3. Cut nozzle at 45º angle to desired bead size.
4. If using the cartridge, load into caulk gun.
5. Fill gap or joint with caulk.
6. If necessary, tool or smooth the bead of caulk with a finishing tool before caulk skins over.
7. Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away.
8. Allow 20 minutes for skin to form on caulk prior to painting with brush or roller. Can be spray painted immediately with latex paint. Allow additional dry time in high humidity or cool temperatures.
9. Reseal container for storage and reuse.