Chat with us, powered by LiveChat

Benjamin Moore Ultra Spec HP Acrylic Metal Primer, White, Gallon

In stock
SKU
HP040101
 
 

*While supply lasts/Item being Discontinued

This unique waterborne, acrylic primer minimizes flash rusting and protects steel from corrosion. Its rust-inhibitive formula is ideal for use on interior and exterior ferrous and galvanized metal. This primer can be applied to slightly damp surfaces and adheres well to most hard to coat substrates. It can also be used to prime masonry substrates.

Recommended For: 
  • Commercial and residential applications
  • Ferrous metal
  • Galvanized metal
  • Equipment
  • Metal buildings
  • Fences
  • Masonry
  • General maintenance
$56.99
each

*Limited stock available

Select a store
81 Available in stock
Delivery
Available

Primers can be tinted towards specific colors. 100% match is not guaranteed.

Maximum 200 characters

  • Water thinned
  • Rust inhibitive
  • Fast dry
  • Fast full cure time
  • Excellent adjesion
  • Can be applied to galvanized metal
  • Not Recommended For:
  • Immersion service
  • Exposure to strong chemicals
  • Exposure to acids or alkali
  • Applying if relative humidity exceeds 90%
More Information
Special OffersDiscontinued
Series/Sub-BrandUltra Spec® HP
TypeInterior/Exterior
SizeGallon
BrandBenjamin Moore
Color FamilyWhite
MaterialWater-Based
Manufacturer CodeHP04

Application: Stir thoroughly before and occasionally during use. Do not thin.  For best application results, apply generously going from unpainted into painted areas. A one-coat application protects and preserves; two coats provides greater durability. Apply with an all-purpose synthetic brush, short nap roller, or spray.

Surface Prep: Surfaces to be coated must be clean, dry, and free of oil, grease, dust, flaky rust, mill scale, loose paint, chalk, and other foreign matter than could interfere with adhesion. Glossy surfaces should be dulled by abrading the surface.

Clean-up: Soap and Water

Coverage: 300 – 400 Sq. Ft. per gallon

Dry Time: To Touch 30 minutes, To Recoat 2 Hours

Do not apply when air and surface temperatures are below 50 °F (10 °C). 

Write Your Own Review
You're reviewing:Benjamin Moore Ultra Spec HP Acrylic Metal Primer, White, Gallon
Your Rating

Painting Galvanized Steel Blog

How to Paint Metal Surface Blog

Best Paint Primer Guide Blog