Metal Corner Bead, 1-1/4 in. x 10 ft.
Clinch-On corner bead is recognized as the premier product for providing sturdy galvanized metal reinforcement on 90˚ drywall corners. Knurled and perforated flanges offer superior compound adhesion for smooth, straight finishes. Corner bead attachments are accomplished by nailing, stapling, screwing or clinching through the flanges.
$4.79
Piece
- Strong metal reinforcement for drywall corners
- Exposed nose of the bead resists impact and forms a screed for finishing
- Metal drywall beads and trims are traditional reinforcement
- Specially enhanced steel to provide consistent, high-quality finishing, and solid protection at drywall corners, every time
- Brand may vary by availability and store location
| Type | Corner Bead |
|---|---|
| Size | 1-1/4 in. x 10 ft. |
| Length | 10 ft. |
| Brand | Clark Dietrich |
| Material | Steel - Galvanized |
- Clinch-On Tool Application:
- Measure the wall height and subtract ½”. Measure and cut the corner bead using aviator snips. Dry fit to ensure accuracy.
- Position the bead on the corner. Place the clinch-on tool over the bead.
- Hit the tool with a rubber mallet to crimp the bead to the corner, repeating every 8” to 10” for optimum fastening.
- Using an 8” taping knife, apply the first coat of joint compound to the surface of the corner bead. The use of lightweight or setting-type compound in this step will reduce shrinkage and speed up drying time. Let this dry completely, for several hours or overnight.
- Using an 8” or 10” taping knife, apply a light finish coat of joint compound. Feather the compound beyond the previous coat. The use of all-purpose or topping compound will make for a more durable finish. Let this dry completely, for several hours or overnight.
- Sand lightly with 120 grit sandpaper.
Write Your Own Review