TimberTech® Advanced PVC Decking by AZEK®, Harvest Collection®, Slate Gray, 12 ft., Grooved Edge
Go Against the Grain™ with capped Proprietary Polymer decking, made with no wood and Alloy Armour Technology® in the cap. These scientifically engineered boards are highly resistant to mold, mildew, and moisture damage and won't splinter, crack, cup peel or rot. Plus, you can rest easy knowing your decking repels scratches, dents, and stains better than any on the market.
This stylish TimberTech® Advanced PVC by AZEK® Harvest Collection® offers solid color boards for a painted wood look. Composed of soft, natural shades, this collection complements most home’s exteriors and offers a traditional cathedral wood grain pattern.
- SUPER DURABLE: Made of high-performance and recycled polymers (and absolutely no wood fibers), TimberTech Advanced PVC decking is highly resistant to moisture damage like mold and mildew, and it won't splinter, crack, cup, peel, or rot.
- FADE & STAIN-RESISTANT: Enjoy a richly hued deck for decades with protective capping that resists UV rays and staining.
- SPLINTER FREE & BAREFOOT FRIENDLY: Better for bare feet and paws, TimberTech Advanced PVC decking won't splinter, and stays up to 30° cooler to the touch with 40% better traction, wet or dry, than competitive products.
- SUSTAINABLE: Made in the USA from approximately 60% recycled material, including post-construction scrap like vinyl siding and trim, TimberTech Advanced PVC decking is a sustainable option. Plus, it’s fully recyclable at the end of its useful life.
- LOW MAINTENANCE: Never sand, stain, or seal your deck ever again. An occasional scrub and rinse are all that’s needed.
- BETTER CHOICE FOR FIRE ZONES: Passes test for slowing flame spread: WUI (Wildlife Urban Interface) compliant.
- INDUSTRY-LEADING WARRANTIES: Rest easy knowing your investment is protected with a 50-Year Fade & Stain Limited Warranty and Lifetime Limited Product Warranty.
- DESIGN VERSATILITY: With multi-width decking and heat-bending capabilities, TimberTech Advanced PVC Decking allows you to create a truly unique design that shows off your sense of style.
| Series/Sub-Brand | Harvest Collection |
|---|---|
| Type | Composite & PVC Decking |
| Size | 5/4 x 6 in. |
| Color | Slate Gray |
| Length | 12 ft. |
| Style | Grooved Edge |
| Brand | Timbertech by Azek |
| Color Family | Gray |
| Finish | Solid |
| Material | PVC |
| Actual Size | 1 in. x 5-1/2 in. |
| Manufacturer Code | AGB15512SG |
Tools Required: Variable speed cordless drill (Do not use impact driver), chalk line, tape measure, jig saw, carpenter square, spacing tools, miter saw, safety glasses TimberTech® AZEK® Decking: AZEK® does not recommend the use of rubber or vinyl products (welcome mats, planters, etc.) on deck boards. A reaction can occur that causes discoloration of the decking under the rubber/vinyl product. This is a common caution for polymer decking products. DO NOT use nails to fasten AZEK® Decking or Fascia boards. Cutting or drilling metal should not be done on AZEK® Deck boards as metal shavings may be come hot and embed themselves into the deck boards. Always be sure to check and cut the factory ends of boards to ensure they are square.
Walking Surface: AZEK® deck boards need to be installed embossed side up only.
Static Electricity: The buildup or generation of static electricity is a naturally occurring phenomenon in many plastic based products such as carpeting, upholstery, and clothing, and can occur on alternative decking under certain environmental conditions. Static electricity is not a defect and can occur naturally.
Cantilevering: For best results, do not cantilever 1/2” beyond the edge of the Fascia or deck framing. Routing: AZEK® Deck/ Fascia should not be routed on the edges, ends, or sides with the exception of the start/stop boards as shown in this guide (under CONCEALoc section).
Color and Grain Patterns: AZEK® Deck is designed to mimic the look of real wood, and like real wood, there will be a slight difference in color and grain pattern from board to board. This is intentional and part of the manufacturing process, giving AZEK® Deck the most realistic and wood-like appearance possible. This variation is purely aesthetic and does not or will not affect the performance of the product. When working with multiple units of decking, consider pulling boards randomly to mix rather than completing one unit at a time. It is always a good practice to layout deck boards in different lighting conditions/angles before final fastening.
Color and Temperature: Although AZEK® Deck products are cooler to the touch than many other deck board products in similar colors, all decking products will get hot in the sun. Additionally, the darker the decking color, the hotter it will feel
Air Flow Considerations: In areas with obstructed airflow such as roofs, water management systems, skirting and on-grade applications, a minimum of 1-1/2” clearance should be provided.
Note: AZEK® Deck is NOT intended for use as columns, support posts, beams, joist, stringers, guard railing or other primary load-bearing members. AZEK® must be supported by a code compliant substructure. While AZEK® products are great deck re-planking (removing old deck surface boards and installing AZEK® on code-compliant substructure), AZEK® Deck Boards SHOULD NEVER be installed on top of an existing deck.
Calculating Material Requirements: To determine how much TimberTech® decking material you will need, start by calculating the square footage of your deck surface by multiplying length by width. Once you know this number, divide it by the numbers provided below for 12’ boards, 16’ boards and 20’ boards. Once you know the square footage number, divide it by 5.5 for 12’ boards, 7.3 for 16’ boards and 9.1 for 20’ boards. When calculating the amount of decking you will need, it is recommended that you add roughly 10% to the total for a scrap factor.
Example: Length x Width = Total Square Footage Square Footage ÷ by 5.5 (12’), 7.3 (16’) or 9.1 (20’) = Boards Needed (Round the number up) Boards Needed + 10% (Scrap Factor) = Final Number of Boards Needed (Round the number up)
