Rust-Oleum® Industrial Choice® Precision Line® is a general purpose inverted marking paint. Use for marking concrete, pavement, gravel, grass, and more. Precision Line is suitable for marking the location of underground utilities at construction and excavation sites where identification is desired.
Series/Sub-Brand | Industrial Choice® |
---|---|
Type | Inverted Spray Paint |
Size | 18 oz. |
Color | White |
Brand | Rust-Oleum |
Color Family | White |
Finish | Flat |
Material | Oil-Based |
Manufacturer Code | 1691838 |
Surface Preparation: Remove loose debris by sweeping the surface before application of the coating.
Application: Use when temperature is 40-90°F (10-32°C) and humidity is below 85% to ensure proper drying. This product can be used down to 25°F (-4°C) which may result in a slight reduction of delivery rate. Protect surrounding surfaces from overspray. Overspray can carry a significant distance. Shake can vigorously for one minute after mixing ball is heard. Invert can and point at ground or floor. Hold can 4 to 10 inches above surface to be marked. Press in sideways to spray or use a marking wand or marking pistol. Follow directions for proper use of this equipment. Keep can moving to prevent build-up.
Clean-Up: Clean valve by spraying upright for 2-3 seconds after each use. Properly discard empty container. Do not burn or place in trash compactor. Empty container can be recycled.
Clogging: If valve clogs, carefully remove spray tip and clean in thinner. DO NOT insert any object into can valve opening
Dry Time:Product dry with 70-80°F (21-27°C) and 50% Relative Humidity in less than 5 minutes