Old Masters, Fast Dry Interior Stain, Dark Mahogany, 1/2 Pint
- Add rich color and depth to a variety of surfaces, including wood, fiberglass, metal, and composition surfaces
- Change existing colors on previously finished surfaces
- Match color tone on different kinds of woods and non-porous surfaces, such as fiberglass
| Type | Interior |
|---|---|
| Size | Half Pint |
| Color | Dark Mahogany |
| Brand | Old Masters |
| Color Family | Red |
| Material | Oil-Based |
| Manufacturer Code | 60816 |
Where to Use: Experience optimal results on all interior wood surfaces, such as cabinets, doors, floors, furniture, and woodwork. Surface Preparation: The wood surface must be clean, dry, and free from dirt, wax, or grease. Sand the wood thoroughly - first with medium grit sandpaper, then progressing to a fine grit paper. Always sand in the direction of the wood grain. Sand smooth, then remove dust particles with a lint-free rag or a tack rag. If staining previously finished surfaces, first restore the surface to bare wood by completely removing the old finish, then follow the surface preparation directions listed above.
Application: Stir well before and during use. Stain may be brushed, sprayed, or wiped onto the surface. Before the stain dries, wipe off excess stain with a soft cloth. Allow stain to dry thoroughly before applying topcoat. See TDS for more details.
Dry Time: Oil-based finishes may be applied 30 minutes after wiping. Dry times may be extended due to humidity, low temperature, lack of air movement, excess stain application, or lack of penetration. Be sure surface is thoroughly dry before top coating. Ideal drying conditions recommended are 70° to 75°F and 35 to 50% humidity.