Graco Airless Spray Tip, Fine Finish Low Pressure, RAC X FF LP SwitchTip, 214 Tip
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 110 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 2 to 4 inch fan pattern and a 0.010 inch orifice, ideal for thin materials. Reverse the SwitchTip to easily clear clogs.
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 214 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 4 to 6 inch fan pattern and a 0.014 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Soft spray fan pattern makes it easy to apply any material to any surface
- Sprays at up to 50% lower pressure with less overspray to provide consistent blended finish quality with complete atomization
- Spraying at half pressure doubles tip life
- Reduces prep and cleanup – you put the paint where you want it
- Wors with GRACO RAC X HandTite Tip Guard only, G246215,
| Type | Spray Tip |
|---|---|
| Size | 214 |
| Style | Reversible |
| Brand | Graco |
| Material | Tungsten Carbide |
| Manufacturer Code | FFLP214 |
Must be used with GRACO RAC X HandTite Tip Guard, G246215, Does not work with orange GRACO RAC IV HandTite Tip Guard. Works with any Graco airless sprayer. Residential, Commercial or Industrial, Cabinetry, Woodworking, Metal and Fine Finish Surfaces.
To Install:
- Make sure spray equipment is turned off
- Remove the old worn tip. Typically turning counter clockwise to release.
- Install new seal into spray tip guard
- Install new tip by aligning it with the opening of the tip guard.
- Check for proper fit
- Test the setup
- Adjust as needed
