General Finishes®, Water-Based Wood Stain, Hickory, Quart
- Water-Based
- Fast-drying
- Achieve rich, & dark colors
- Easy-to-Use
- Uniform Colors
- Can be used over existing stain
| Type | Interior Stain |
|---|---|
| Size | Quart |
| Color | Hickory |
| Brand | General Finishes |
| Color Family | Brown |
| Material | Water-Based |
| Manufacturer Code | WHQT |
Application Conditions: Recommended 70°F and 50% humidity, out of direct sunlight, with good air movement. Variations in conditions and application technique can significantly affect dry times and coverage.
Surface Prep: Ensure the surface is clean of contaminants and dust. Variations in substrate, prep procedures, and application procedures can significantly affect color. Always test for color before staining your project.
Raw Wood: On hard woods such as Maple, Birch and Oak, sand no finer that 150 grit. On so woods such as Pine, Alder and Cherry sand no finer than 180 grit.
Pre‐finished Wood: Clean using 50/50 mix of denatured alcohol and water with maroon non‐woven pad. Sand with fine (220‐320) foam sanding pad or maroon non‐woven pad.
Other Substrates: Can be used. Always test for adhesion.
Application Tips on Raw Wood: Apply stain using a rag, bristle brush, foam brush or paint pad applicator and wipe of excess with a clean cloth. If a darker color is desired, allow the first coat to dry completely and then a 2nd coat can be applied in the same manor.
Application Tips on Existing Finishes or Solid Substrates: Apply stain using a rag, bristle brush, foam brush or paint pad applicator. Remove excess stain with a cloth or bristle brush to achieve desired effect. Note: Do NOT apply a thick coat like a paint without removing excess. Always test for adhesion.
System Recommendations: Finish with 3 coats of any GF clear topcoat.