My Cart
You have no items in your cart.
Please wait...
Please wait...
Address: 181 West Ave, Darien, CT 06820
Address: 9 Taylor Ave, Bethel, CT 06801
Address: 355 Newbury St, Boston, MA 02115
Address: 25 E Industrial Rd, Branford, CT 06405
Address: 59-67 Federal Rd, Danbury, CT 06810
Address: 1139 Post Rd, Fairfield, CT 06824
Address: 848 Lafayette Rd, Hampton, NH 03842
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Address: 85 Bradley Rd, Madison, CT 06443
Address: 149 Everett St, Middleboro, MA 02346
Address: 1193 Ashley Blvd, New Bedford, MA 02745
Address: 308 S Frontage Rd, New London, CT 06320
Address: 140 Danbury Rd, New Milford, CT 06776
Address: 201 Merrimac St, Newburyport, MA 01950
Address: 50 Needham St, Newton Highlands, MA 02461
Address: 14 Church Hill Rd, Newtown, CT 06470
Address: 28 Hope St, Niantic, CT 06357
Address: 149 Westport Ave, Norwalk, CT 06851
Address: 131 Boston Post Rd, Orange, CT 06477
Address: 58 Shops at Five Way, Plymouth, MA 02360
Address: 1037 Forest Ave, Portland, ME 04103
Address: 1976 Woodbury Ave Ste 2, Portsmouth, NH 03801
Address: 35 Scamman St, Saco, ME 04072
Address: 153 Ocean St, South Portland, ME 04106
Address: 87 Harvard Ave, Stamford, CT 06902
Address: 921 High Ridge Rd, Stamford, CT 06905
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeAddress: 921 White Plains Rd, Trumbull, CT 06611
Address: 14 Warren St, Waltham, MA 02453
Address: 877 Post Rd E, Westport, CT 06880
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Address: 129 Danbury Rd, Wilton, CT 06897
Address: 116 Cummings Park, Woburn, MA 01801
Address: 412 Route 1, Yarmouth, ME 04096
Gemini® Evo® Eclipse is the newest breakthrough waterborne coating system from Gemini Industries that again raises the bar for wood coatings in North America. Waterborne has never been easier or… Show more
Gemini® Evo® Eclipse is the newest breakthrough waterborne coating system from Gemini Industries that again raises the bar for wood coatings in North America. Waterborne has never been easier or better. Eclipse is super smooth off the gun and dries fast. Just stir and go. Eclipse is extremely durable right out of the can as one component 1K application. To achieve extra hardness, chemical, or water resistance, the Eclipse system may also be further crosslinked with our EVO Hardener for maximum 2K performance.
Eclipse is a waterborne system with virtually no odor, so it is perfect for on-site finishing.
Eclipse clear topcoat is a premium, technologically advanced waterborne topcoat for interior woodwork. Eclipse dries quickly, has great clarity, and is more user friendly than most low VOC solvent coatings. It exhibits excellent durability as a single pack product, and ECLIPSE’s dual cross-linking technology gives the finisher the ability to further increase durability and chemical resistance by adding an optional hardener.
Typical Uses: Kitchen and bathroom cabinetry, architectural millwork, furniture, and shutters. For wood substrates only. For interior use only.
Show less| Series/Sub-Brand | Evo® Eclipse |
|---|---|
| Type | 1K/2K Topcoat |
| Size | Gallon |
| Color | Clear |
| Brand | Gemini |
| Finish | Semi-Gloss |
| Material | Water-Borne |
| Manufacturer Code | ECL00601 |
Application & Surface Preparation: Recommended as a spray only application. Remove any dirt, grease, or other contaminants on surface. Sand wood with 150-180 grit sand paper. If re-finishing, recommended to strip the old finish completely and remove all contaminants from surface. Using a conventional HVLP airless or air assisted equipment, apply this product 3-4 wet mils per coat. Let dry a minimum of 60 minutes. Sand with 280-320, no-fill sand paper and remove sanding dust. This product must be sanded in between coats to ensure proper adhesion. Recommended 1-2 coats primer, 1-2 coats of desired color in the desired sheen. May also be over-coated with clear Eclipse topcoat. The maximum dry film thickness of the complete system must not exceed 8 dry mils thick.
Recommended Tip Size: Conventional Air 1.8-2.0mm, HVLP 1.9-2.2mm, Airless 8-10 thousandths, Air Assisted Airless 9-11 thousandths
Mixing Instructions: Mix material thoroughly before and during use. Can be mixed by hand or agitation at a moderate speed.
Pot Life: After adding hardener is 1-2 hours max.
Coverage: 400-450 square feet per gallon at 1 mil dry film thickness
Dry Time: Air Dry To handle 25-35 Minutes, To Sand/Recoat 60 minutes, Stackable 24 hours
Clean Up: Use water to clean all equipment when material is still in liquid form.
After Care of product: Use mild dishwashing liquid and a damp cloth to remove food, grease, and other residue. Wipe Dry. Do not use cleaners that contain ammonia, bleach, or abrasives as this may damage the finish.
