Fase Silossanica is an exterior sealer that is used as a medium for color washing over mineral based finishes. A special finishing coat for exterior facades in historical town and country areas, with respect to the historical heritage, it is a finishing coat for synthetic facades, where highly prestigious aesthetic effects are required. Fase silossanica is a transparent vehicle made of acrylic and styrene copolymers, siloxane resins and special additives. The particulare fomulation of Fase Silossanics allows the application on miltiple supports, such as synthetic, mineral and siloxane surface for interior and exterior velaturas. It allows to achieve vibrant transparent chromatic effects, with the possibility to obtain different nuances and shades depending on the colours and on the application technique.
NOTE: On-screen and printed color representations may vary from actual tinted paint colors.
Series/Sub-Brand | Novacolor™ |
---|---|
Type | Interior/Exterior |
Size | 1 Liter |
Color | Transparent |
Brand | firenzecolor |
Material | Siloxane Resin |
Manufacturer Code | 21F1 |
Surface & Preparation Application: Substrate must be perfectly dry, and dust-free, with no humidity and salt stains. Resurface or consolidate the surface with specific products if necessary. In case of mold, treat the surface with suitable specific products. Brush and remove any efflorescence and old peeling paint. Higher layers of old lime-based paint and tempera paint must be removed. Brush out dust, and remove smog or other deposits before application. Over dry and compact substrates, apply one layer of Aricolor or Novaprimer, diluted, with a brush. Over dry primer, apply one layer of Novalux E, diluted with a brush or with a short-haired roller. After second coat of Novalux E, Apply one layer of Fase Silossanica with a brush, sponge, or glove. Working the surface depending on the desired effect. To enhance the aesthetic effect, it is possible to apply a second layer of Fase Silossanica.
Dry Time: 24 hours approximately, depending on the kind of substrate, absorption rate, and environmental conditions.
Apply: With a brush, sponge, or glove, working the surface depending on the desired effect
Clean Up: With water, Immediately after use.
Dilution: Maximum dilution rate 100% with water.
Coverage: 300 square feet per 1 liter, depending on the kind of substrate and its absorption rate.