Fire-Shield Gypsum Board Sheetrock Drywall 5/8 in. x 4 ft. x 8 ft.
Gold Bond® BRAND Fire-Shield® Gypsum Board panels consist of a fire-resistant gypsum core encased in heavy natural-finish, 100% recycled paper on the face and back sides. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth. Use it for interior, fire-rated wall and ceiling applications. A specially
formulated Type C core is also available where required.
As low as $19.99
Piece
- Lightweight, cost-efficient material that readily accepts a wide range of decorative finishes
- Cuts easily for quick installation, permitting painting or other decoration and the installation of metal or wood trim almost immediately
- Fire-resistant material with a gypsum core that will not support combustion or transmit temperatures greatly in excess of 212 ̊F (100 ̊C) until completely calcined, a slow process
- Dimensionally stable under changes in temperature and relative humidity and resists warping, rippling, buckling and sagging
- Approved component in specific UL-rated designs
| Series/Sub-Brand | Gold Bond® Fire-Shield® |
|---|---|
| Type | Drywall Sheet |
| Size | 4 ft. x 8 ft. |
| Thickness | 5/8 in. |
| Rating | Fire Resistant |
| Brand | National Gypsum Co |
| Finish | Natural |
| Material | Gypsum Core |
GridMarX provides quick identification and uniform nail/screw patterns. Use GridMarX to make accurate cuts without drawing lines. GridMarX guide marks run the length of the board at five points in 4" (102 mm) increments. Marks run along the edge in both tapers and at 16" (406 mm), 24" (610 mm) and 32" (813 mm) in the field of the board. The marks cover easily with no bleed-through using standard paint products.
Write Your Own Review