Phenoseal® Does It All!® Vinyl Adhesive Caulk, Translucent, 10 fl. oz.
- Indoor/outdoor use
- Kitchen, bath, windows & doors
- Fast-drying
- Paintable
- Easy water clean-up
- Low VOC
| Type | Adhesive |
|---|---|
| Size | 10 fl. oz. |
| Color | Translucent |
| Brand | Phenoseal |
| Material | Vinyl Acetate Homopolymer |
| Manufacturer Code | 00006 |
1. Surface must be clean, dry and free of all old caulk, dirt, dust, debris and grease. Rubbing alcohol is recommended for removing soap film and soil.
2. Remove cap (from tube). Cut nozzle at 45º angle to desired bead size. Puncture Inner foil seal.
3. Load into caulking gun if using the 10 fl. oz. cartridge.
4. Apply caulk to surface, pushing caulk ahead of nozzle.
5. If necessary, smooth bead with finishing tool.
6. Clean up excess uncured caulk with a damp sponge before it skins over. Cured caulk must be cut or scraped away.
7. Caulk applies white, dries clear in approximately 7 – 14 days (depending on joint depth, temperature & humidity). Product should not be painted until it has turned clear.
8. Translucent color may whiten when exposed to water, but clarity will return after drying. Quality will not be affected.
9. Reseal cartridge/tube for storage and reuse