DAP® 3.0™ High Performance Window, Door, Siding & Trim Sealant, Crystal Clear, 9 fl. oz.
- Superior flexibility & adhesion
- 30 minute rain & paint ready
- Wet/damp surface application
- Extreme temperature use: 20ºF to 120ºF
- 100% waterproof & weatherproof
- Shrink & crack proof
- Easy gunning, smooth tooling
- Low odor
- VOC compliant
- Interior/exterior use
| Type | Sealant |
|---|---|
| Size | 9 fl. oz. |
| Color | Crystal Clear |
| Brand | DAP |
| Material | Advanced Hybrid Polymer |
| Manufacturer Code | 18362 |
1. Cut nozzle at a 45° angle to desired bead size.
2. Puncture inner foil seal.
3. Load into caulk gun.
4. Fill gap or crack with sealant.
5. If necessary, tool or smooth the bead of sealant with a finishing tool before the sealant skins over.
6. Allow sealant to cure for at least 30 minutes before exposing to water. Sealant surface may still be tacky. Sealant reaches full cure in 24 hours.
7. Clean up excess wet sealant from surface and tools with mineral spirits. Scrape or cut away excess dried sealant. Do not use mineral spirits to clean hands or skin. Wash hands or skin with soap and water.
8. Paintable in 30 minutes. Use only high quality acrylic latex coatings. 30 minute performance achievable with 3/8” maximum diameter bead, temperature at 73°F minimum & 50% relative humidity. Use an acrylic primer for oil-based paints.
9. Reseal cartridge for storage and reuse.